Bu ürün, dekoratif yüzey uygulamalarında çelik mala veya sünger ile uygulanabilen, yüzeye parlaklık kazandırmak amacıyla kullanılan ince efekt katmanıdır. Uygulama sonrası kadife bezle parlatılarak sofistike bir görünüm elde edilir.
Uygulama Talimatı:
- Ürün, çelik mala veya sünger yardımıyla yüzeye uygulanır.
- İkinci kat uygulanacaksa, ilk katın tamamen kuruması beklenmelidir.
- İkinci kat kurumaya başladığında, yüzey kadife bir bezle parlatılarak final görünüm kazandırılır.
Uygulama Koşulları:
- Bağıl nem oranı %10 ile %75 arasında olmalıdır.
- Oda sıcaklığında (22.5 °C) toz tutma kuruması yaklaşık 1 saat, tam kuruma süresi ise 24 saattir.
Tüketim:
Tek başına kullanıldığında, ortalama 1 m² için 40–50 gram ürün yeterlidir.
-
This product is a fine decorative effect layer designed to provide surface gloss and a sophisticated finish. It can be applied with a stainless steel trowel or sponge on decorative surface applications. After application, the surface is polished with a velvet cloth to achieve an elegant, refined appearance.
Application Instructions:
• Apply the product to the surface using a stainless steel trowel or sponge.
• If a second coat is to be applied, allow the first coat to dry completely before proceeding.
• When the second coat begins to dry, polish the surface with a velvet cloth to obtain the final glossy effect.
Application Conditions:
• The relative humidity should be between 10% and 75%.
• At room temperature (22.5°C), the surface dry time is approximately 1 hour, and the full drying time is 24 hours.
Consumpiton:
When used alone, approximately 40–50 g of product per m² is sufficient, depending on the surface texture and application method.